Shure SLXD14W93H57 Wireless Lapel Microphone System – H57

Shure SLX14W93H57 Wireless Lapel Microphone System – H57

The Shure SLX14W93H57 is a Wireless Lapel Microphone System.

It features the WL93 Miniature Omnidirectional Lavalier Microphone and SLXD1 transmitter.  What’s more, SLXD14/93 provides transparent digital audio and rock-solid RF stability for lecture halls and live performances.

Product Details

Also, SLXD14/93 Wireless System delivers transparent, 24-bit digital audio and rock-solid RF performance. Furthermore, SLX14W93H57 is built for a wide range of applications, from day-long presentations to nighttime performances.

Additionally, operate up to 32 compatible systems per 44 MHz band, with easy setup and optional rechargeability accessories for wireless excellence, wherever required. What’s more. it ships with SLXD4 single-channel receiver, SLXD1 bodypack transmitters and WL93 Miniature Omnidirectional Lavalier Microphone with antenna and rackmount accessories and 2 AA batteries.

Overall Key features of Shure SLX14W93H57

• Extended 20 Hz to 20 kHz frequency range (microphone dependent)
• Also provides 118 dB dynamic range
• Digital predictive switching diversity
• 44 MHz tuning bandwidth (region dependent)
• 32 available channels per frequency band (region dependent)
• Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
• Easy pairing of transmitters and receivers over IR scan
  and sync
• Compatible with Shure Wireless Workbench® control
  software
• Remote control via ShurePlus™ Channels mobile app
• Above all, it provides up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery.

 

• Extended 20 Hz to 20 kHz frequency range (microphone dependent)
• 118 dB dynamic range
• Digital predictive switching diversity
• 44 MHz tuning bandwidth (region dependent)
• 32 available channels per frequency band (region dependent)
• Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
• Easy pairing of transmitters and receivers over IR scan
  and sync
• Compatible with Shure Wireless Workbench® control
  software
• Remote control via ShurePlus™ Channels mobile app
• Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery

 

SPECIFICATIONS of DIGITAL WIRELESS RECEIVER (SUBJECT TO CHANGE)
Dimensions (H × W × D): 1.65 × 7.76 × 5.98 in (42 × 197 × 152 mm)
Weight: 1.8 lb (816 g) without antennas
Housing: Galvanized Steel
Power Requirements: 15 VDC @ 600 mA Supplied by external power supply (tip positive)

 

SYSTEM SPECIFICATIONS (SUBJECT TO CHANGE)

RF
RF Carrier Frequency Range: 470–937.5 MHz
Varies by Region. See Frequency Range and Output Power Table.
Working Range: 100 m (328 ft)
Note: Actual range depends on RF signal absorption, reflection and interference.
RF Tuning Step Size:
JB Band: 125 kHz
All Other Bands: 25 kHz
Varies by region.
Image Rejection: >70 dB typical
RF Sensitivity: −97 dBm at 10-5 BER

AUDIO
Latency: 3.2 ms
High-Pass/Low Cut Filter: 150 Hz, –12 dB/octave
Note: factory default is for the HPF to be off
Audio Frequency Response: 20 Hz–20 kHz (+1, −2 dB)
Audio Dynamic Range
A-weighted, 20 Hz–20 kHz, typical
118 dB
@1% THD
Total Harmonic Distortion: <0.02%
System Audio Polarity:
XLR: Positive pressure on microphone diaphragm produces positive voltage on pin
2 with respect to pin 3 of XLR output.
TRS: Postive pressure on microphone diaphragm produces positive voltage on the
tip of the 6.35 mm (1/4-inch) with respect to the ring of the 6.35 mm output.
Mic Offset Range: 0 to 21 dB (in 3 dB steps)

TEMPERATURE RANGE Note: Battery characteristics may limit this range.
Operating Temperature Range: 0 °F to 122 °F (−18 °C to 50 °C)
Storage Temperature Range: −20 °F to 165 °F (−29 °C to 74 °C)
NOTE: This Radio equipment is intended for use in musical professional entertainment and similar applications. This Radio apparatus may be capable of
operating on some frequencies not authorized in your area.