MARTIN ERA 300 Profile COMPACT LED MOVING HEAD PROFILE WITH CMY COLOR MIXING

$8,490.00
Sold Out - Backorder Available


Calculate Shipping



PICK UP FROM STORE - $0.00
FREE PICK UP BETWEEN 10AM - 4.30PM WEEKDAYS FROM THE PRODUCTION SHOP

FEATURES

  • 260 watt / 6,500K LED light source
  • 9,500 lumen output
  • Full feature set including CMY color mixing and 1:2 zoom
  • Crisp optics with flat field
  • Very compact and low weight design

SPECIFICATIONS

  • PHYSICALLength: 375 mm (14.8 in.)Width: 217 mm (8.5 in.)Height: 564 mm (22.2 in.)Weight: 17kg (38lbs)

    DYNAMIC EFFECTSColor mixing: CMY, independently variable 0-100%Color wheel: 9 color filters plus openBeam effects: Rotating three-facet prismRotating gobo wheel: 7 gobos plus open, wheel rotation, gobo rotation, indexing and shakeStatic gobo wheel: 9 gobos plus open, wheel indexing, rotation and shakeIris: 0-100%Electronic dimming: 0 - 100%, four dimming curve optionsElectronic shutter effect: Strobe effect, pulse effects, instant open and blackoutZoom: MotorizedPan: 540°, coarse & fine control and speedTilt: 260°, coarse & fine control and speedFocus: Motorized

    CONTROL AND PROGRAMMINGControl options: DMXDMX channels: 2116-bit control: Dimming, pan and tiltSetting and addressing: Control panel with backlit LCD displayDMX compliance: USITT DMX512/1990RDM compliance: ANSI/ESTA E1.20Transceiver: Opto-isolated RS-485

    OPTICSZoom range: 13° - 28°Light source: 260W LED engineMinimum LED lifetime: 20,000 hours (to >70% luminous output)*Binning: Tight color and flux binning*Manufacturer´s figure obtained under manufacturer´s test conditions.

    PHOTOMETRIC DATALight engine luminous output: 20,000 lumensFixture luminous output: 9,500 lumensCRI (Color Rendering Index) : >70CCT: 6500 KelvinLED refresh rate : 1200 Hz

    * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

    CONSTRUCTIONHousing: High-impact flame-retardant thermoplasticColor: Black/WhiteProtection rating: IP20

    GOBOSGobo diameter: 26.8 mm +/- 0.2 mm (1.1 in. +/- 0.008 in.)Maximum image diameter: 19.0 mm (0.75 in.)Gobo thickness, maximum: 1.1mm borosilicate glass

    INSTALLATIONMounting points: Two quarter-turn brackets for rigging clampsOrientation: Any

    CONNECTIONSAC power in, thru: Neutrik powerCON TRUE1DMX data in/out: 3-pin & 5-pin locking XLR

  • ELECTRICALAC power: 100-240V nominal, 50/60 HzFuse: T 6.3APower supply unit: Auto-ranging electronic switch mode

    TYPICAL POWER AND CURRENT120 V, 60 Hz: 3.13A, 374W, PF 0.999230 V, 50 Hz: 1.62A, 362W, PF 0.993Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

    THERMALCooling: Forced air (temperature regulated, low noise)Maximum ambient temperature (Ta max.): 40° CMinimum ambient temperature (Ta min.): 0° C

    ENVIRONMENTALRoHS: CompliantREACH: CompliantWEEE: CompliantProposition 65: Compliant

    APPROVALSGlobal CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1)EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493EU EMC: EN 55015; EN 55032; EN 55103-2; EN 61000-3-2,-3; EN 61547US safety: UL 1573US EMC: FCC Part 15 Class BCanadian safety: CSA C22.2 No. 166Canadian EMC: ICES-003 Class B, ICES-005 Class BAustralia/NZ: RCM

    INCLUDED ITEMS

    Power cable, 1.5 m (4.9 ft.) 18AWG/0.75 mm2 without mains plug
    Omega brackets for rigging clamp attachment

    RELATED ITEMSMartin Companion Cable: P/N 91616091Martin Companion Software Suite (including firmware uploader) Free download from www.martin.com

    ACCESSORIESCables, 16 A, for connection to power in chains:

    Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797
    Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786
    Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173
    Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174

    Cables, 16 A, for relaying power in chains:

    Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91611784
    Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91611785
    Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611786
    Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91610170
    Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91610171
    Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172

    Connectors:

    Power connector, cable mount, Neutrik TRUE1 NAC3FX-W (female): P/N 91611789
    Power connector, cable mount, Neutrik TRUE1 NAC3MX-W (male): P/N 91611788

    Installation hardware:

    G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
    Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
    Half-coupler Clamp: P/N 91602005
    Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
    Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

(MARERA300-PROFILE)

SKU MARERA300-PROFILE
Brand Martin
Shipping Weight 18.0000kg
Shipping Width 0.250m
Shipping Height 0.610m
Shipping Length 0.400m
Shipping Cubic 0.061000000m3

Be The First To Review This Product!

Help other The Production Shop Sydney users shop smarter by writing reviews for products you have purchased.

Write a product review


More From This Category