LD Systems DSP44K 4-Channel DSP Amplifier with Dante

PICK UP FROM STORE - $0.00
FREE PICK UP BETWEEN 10AM - 4.30PM WEEKDAYS FROM THE PRODUCTION SHOP

Dante™ enabled 4-channel power amplifier with DSP control
4 x 1,200 watts @ 4 and 2 ohms, 2 x 2,400 watts bridged @ 4 ohms
10 Hz – 22 kHz frequency response with 120 dB dynamic range
24-bit/48kHz DSP with FIR and IIR filters, parametric EQ, crossover, delay, RMS and peak limiters
DC, overcurrent, thermal and short circuit protection, soft start, clip and SMPS overload limiters
Dual temperature-controlled fans
Power factor correction (PFC)
Menu driven 4-line display with rotary encoder and security lock
Includes control and monitoring software and LD Systems® Loudspeaker Preset Library

Technical Data

Type:	4-channel
Rated output power:	1kHz @ 2 Ohms: 4 x 1200 W 1kHz @ 4 Ohms: 4 x 1200 W 1kHz @ 8 Ohms: 4 x 675 W 1kHz @ 4 Ohms, bridged: 2 x 2400 W 1kHz @ 8 Ohms, bridged: 2 x 1200 W
High Z 70Vrms / 100Vpeak:	4 x 1200 W
High Z 100Vrms / 140Vpeak:	2 x 2400 W
Output circuitry:	Class H
Frequency response:	10 – 22000 Hz
Total Harmonic Distortion (THD):	< 0.05 % @ 1 kHz
Signal-to-noise ratio:	104 dB
Protection circuits:	Clip limiter , DC protection , Multiband limiter , over-current , RMS speaker limiter , short circuit , soft start , thermal protection
Controls:	Direct access buttons , Exit / lock button , On / off switch , Rotary switch
Indicators:	LC display
Line inputs:	4 x Neutrik XLR
Line outputs:	4 x Neutrik XLR
Loudspeaker outputs:	4
Speaker output connections:	Speakon
Cooling:	2 fans, temperature controlled
Maximum Ambient Temperature:	0 – 40° °C
Operating voltage:	220 V AC – 240 V AC, 50-60 Hz , Switching power supply
Relative Humidity:	< 80% (non-condensing)
Power consumption @ full load:	1900 W
Dimensions (W x H x D):	482 x 89 x 320 mm
Weight:	1.8kg
Features:	19″ / 2 U , Active Power Factor Correction , Computer control software , Dante interface , DSP controlled , Ethernet , LD Systems loudspeaker preset library , USB front port

(AVELDS-DSP44K)