Selecon 80V independent variable output power supply; DMX ctrl for the Pacific range and Rama High Performance Fresnel 80V model luminaires. 220-240V
SAVE $54.28 (7%)Sold Out - Backorder Available
||(a) Dimmer to Power Supply - an electronic transformer tracking the incoming (dimmed) supply to deliver a maximum of 80V at the lamp. Mains supply input 220V-240V to be supplied via a high quality entertainment type dimmer. The transformer output tracks the dimmer output',' typically the response delay is as experienced with 2000W mains voltage luminaires. |
(b) Mains powered',' DMX controlled stand alone Power Supply.
||Either on the lighting bar in close proximity to the luminaire or mounted on to the luminaire yoke (not recommended for permanent installations). As the power supply is a high frequency device the supply must be in close proximity to the lamp. |
|1200W 80V lamp
||The 1200W 80V lamp is a high performance lamp intended for 'non continuous' use i.e. as for a studio lamp / theatre lamp',' a few hours of use at a time',' regularly. It is not intended as a display type luminaire. These lamps are manufactured by both Philips and GE.|
|80V Power System to lamp module connector - Powercon Connector Specification|
|1431 Connector and plug-and socket-devices Neutrik AG',' Im alten Riet 34',' FL-9494 SCHAAN 20 Connector type: NAC3FCA|
|Female part',' NAC3FCA',' NAC3FCB Female part',' NAC3FCB Female part',' NAC3MM Male part',' NAC3MPA',' NAC3MPA-WOT Male part',' NAC3MPB',' NAC3MPB-WOT|
|Male part technical properties:|
|Rated voltage AC 250V|
|Rated current 20A / 2.5mm² up to ambient temperature 35°C|
|Degree of protection IP 20|
|Kind of construction not standardized; with coding UL file number E135070|
|Downloads available via UL search engine',' cut and paste this UL file number: E135070 into the search box.|
|Sine Wave Dimmers|
|Venues with sine wave dimmers can directly control Selecon 80V luminaires by programming the sine wave dimmer output to 80V',' as measured at the luminaire.|
The power supply can be either mounted on the lighting bar in close proximity to the luminaire or mounted on to the luminaire yoke (not recommended for permanent installations). As the power supply is a high frequency device the supply must be in close proximity to the lamp.
Complies with CE requirements.
|80V Power System lamp module wiring for Sine Wave Dimming |
|• Cable Colour: Black |
Pin Number: 4-Circuit: Phase /microswitch
|• Cable Colour: Brown|
Pin Number: 4+4+ Circuit:Phase to lamp
|• Cable Colour: Green |
Pin Number: 3-Circuit: Earth
|• Cable Colour: Black|
Pin Number: 2-Circuit: Phase / microswitch
|• Cable Colour: Blue|
Pin number: 2+2+Circuit: Neutral to lamp
Be The First To Review This Product!
Help other The Production Shop users shop smarter by writing reviews for products you have purchased.